Westerbeke 38B FOUR Manuel de l'opérateur télécharger pdf (Page 29)

General

DESCRIPTION

INSTRUMENT

PANEL

PREHERT

START

STOP

GENERRTOR

The manually operated series

Westerbeke generators

equipped with toggle switches and optioual

remote panels. The Standard Instrument Panel (shown above) includes two gauges which indicate water

temperatnre in degrees Fahrenheit (WATER

OF)

and oil pressure in pounds per square inch (OIL PSI).

This panel is also equipped with two meters which indicate DC control circuit voltage (VOLTS) and the

generator's running time (ELAPSED TIME) in HOURS and

1/19 hours. The water temperature and oil

pressure gauges and the DC volt meter are illuminated; the ELAPSED

TIME

meter is not illuminated.

PREHEAT: The PREHEAT switch energizes the engine's glow plugs, activates the electric fuel

pump, bypasses the engine's oil pressure switch, and activates the fuel run solenoid. In addition, this

switch energizes the START switch.

START: The START switch, when pressed, energizes the starter's solenoid which cranks the

engine. This switch will not operate electrically unless the PREHEAT switch

pressed and held at

the same time.

STOP: Through the STOP switch power

provided to the fuel solenoid. Opening this switch

deactivates the fuel solenoid and shuts off fuel to the engine, thereby stopping the engine.

NOTE: When the engine is manually shut down, the water temperature gauge and oil pressure

gange will continue to register the last temperature reading and oil pressure reading indicated

by the gauge before electrical power was turned

off.

The temperature gauge and oil pressure

gauge will return to zero once electrical power

restored to these gauges.

WESTERBEKE

GENERATORS

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 85 86

Pas de commentaire

Westerbeke 38B FOUR Manuel de l'opérateur Page 29